Half hat, 7.5 in / 190 mm, 6 in / 150 mm tube, black

Overview
The ETC Half hat, 7.5 in / 190 mm, 6 in / 150 mm tube, black is part of the ETC Top Hats, Half Hats & Donuts range. Top hats and half hats mount in a fixture's outer gel slot to control spill and reduce the visible angle of the lens, with the half hat cutting on one side only. Donuts are plates with a reduced aperture that sit in the gel slot to cut stray light. ETC offers each in sizes matched to the fixture or lens tube's accessory slot.

Compatible with
Source Four, Source Four LED and ColorSource Spot lens tubes (6.25 in, 12 in, 14 in, and 7.5 in for 14/70/90 degree tubes) and 7.5 in slot fixtures such as Source Four PAR and the LED Fresnel Adapter.

Highlights

• Mount in the outer gel slot to control spill and glare
• Half hats shield one side of the beam
• Donuts reduce stray light through a smaller aperture
• Sizes for 6.25, 7.5, 12 and 14 in slots
• Black, white and silver finishes

Key Specs

• Part Number: PSF1027
• Finish: Black
• Accessory size: 7.5 in / 190 mm
• Top hats: 6.25 in / 159 mm (PSF1021), 7.5 in / 190 mm with 3 in (PSF1022) or 6 in (PSF1023) tube, 12 in / 305 mm (PSF1024), 14 in / 356 mm (PSF1025)
• Half hats: 6.25 in (PSF1026), 7.5 in (PSF1027)
• Donuts: 6.25 in with 2.5 in / 63 mm aperture (7060A1015), 7.5 in with 3 in / 76 mm aperture (7060A1016), 12 in (7060A1028), 14 in (7060A1029)