W-DMX - Generation 2: Quick Start Guide
View as PDF for offline viewing and printing.
To view PDFs, download Adobe Acrobat Reader.
Latest Quick Start Guide Available
1. Make all signal and power connections to transmitter and receivers. (NOTE: If utilizing more than one universe, the first universe must be powered and synchronized separately. After it has synchronized you may leave it connected while adding any additional universes.
2. Press and quickly release the function button on the transmitter.
3. The transmitter will start flashing rapidly red/green scanning for new free receivers.
4. After approximately 10 seconds the transmitter will jump back to normal mode and continue transmitting data.
5. The receivers are now automatically synchronized to the transmitter.
Note: To clear ALL receivers and restart, press and hold the TRANSMITTER function button for 3-4 seconds. To clear a SINGLE receiver into idle mode, press and hold that RECEIVER function button for 3-4 seconds.
| Light | What It Means |
|---|---|
| Flashing red/green | No DMX connected |
| Solid green | DMX signal detected and transmitted |
| Fast flashing red/green | Log in mode (every free receiver, not logged in to any other transmitter, will be logged on) |
| Light | What It Means |
|---|---|
| Solid red | Not logged on to a transmitter (free) |
| Flashing green ~1 seconds / red ~0,1 seconds | Logged on to a transmitter and DMX line idle |
| Solid green | Logged on to a transmitter and receiving DMX data |
| Fast flashing red/green | Log in mode (getting log in configuration data from a transmitter) |