W-DMX: Quick Start Guide

View as PDF for offline viewing and printing.

To view PDFs, download Adobe Acrobat Reader.

Previous generation Quick Start Guide still available.

1. Make all signal and power connections to transmitter and receivers. (NOTE: If utilizing more than one universe, the first universe must be powered and synchronized separately. After it has synchronized you may leave it connected while adding any additional universes.

2. Push the function button momentarily. This starts the automatic log on.

3. The Link LED indicator will go from rapid flashing to static on to indicated successful log on.

4. The Transmitter and Receiver(s) are now logged on and will remain logged on until powered down.

Note: To clear all Receivers and restart, press and hold the Transmitter function button for 5 seconds. To remove a single receiver, press and hold that Receiver's function button for 5 seconds.

Transmitter LED Status

Light	What It Means
Link LED Status
On:	Receiver(s) are logged on to this transmitter
Flashing:	Logging out all receivers that are logged in
Rapid Flashing:	Logging in all free receivers that are in range
Data LED Status
On:	DMX data is being transmitted

Receiver LED Status

Light	What It Means
Link LED Status
Off	Not logged on to a transmitter (free)
On:	Logged in to a transmitter
Rapid Flashing:	Logging in to a transmitter
Data LED Status
On:	DMX data is being received